List of unit tests

Mechanical tests

  • UniaxialTensileTest: a simple test on a unit cube to test various behaviours: - an orthotropic elastic behaviour, - a simple isotropic behaviour, - one of the Mazars damage behaviours, - the Saint-Venant-Kirchhoff hyperelastic behaviour The results are compared to reference results

  • RveNonLinearElastic: a test of a Representative Volume Element using an elastic behavior law

  • RveNonLinearElasticV2: same test using another constructor of the PeriodicNonLinearEvolutionProblem class

  • ImposedPressureTest: a simple test to check that the imposed pressure boundary condition works as expected.

  • MixedOxideFuels: a simple test of a RVE using an elasto-viscoplastic law, the full simulation is available at ex7 in the mfem-mgis-examples github repository.

  • SatohTest: this test models a 2D plate of lenght 1 in plane strain clamped on the left and right boundaries and submitted to a parabolic thermal gradient along the x-axis: - the temperature profile is minimal on the left and right boundaries - the temperature profile is maximal for x = 0.5 This example shows how to define an external state variable using an analytical profile.

Heat transfer

  • StationaryNonLinearHeatTransferTest: a simple test checking that the stationary nonlinear heat transfer behaviour integrator works as exepected.

Micromorphic damage

  • MicromorphicDamage2DTest: this test compares the calculation make with the micromorphic with damage behaviour integrator a manufacturaed solution in 2D.

  • MicromorphicDamage2DTest2: this test set describes the failure of a bar using an alternate minimization algorithm between a mechanical model and a model describing damage evolution in 2D.

  • MicromorphicDamage3DTest: this test set describes the failure of a bar using an alternate minimization algorithm between a mechanical model and a model describing damage evolution in 2D. solution.

Unit tests

  • PostProSubMesh: This test provides some tests of ParaviewExportResults

  • PeriodicTest: This test provides some tests of periodic features

  • ParallelReadMode: This test checks that the reader can read correctly a splitted mesh.

  • PartialQuadratureFunctionTest: This test provides some tests on partial quadrature functions.

  • GridFunctionTest: test the update function which projects a GridFunction on a partial quadrature function.

  • L2ProjectionTest: test the computeL2Projection function which projects a partial quadrature function on a GridFunction.

  • ImplicitGradientRegularizationTest: test the computeImplicitGradientRegularization which computes the implicit gradient regularization of a partial quadrature function.

<!– ## Benchmark

  • elasticity: pure elastic test base

–>